200-06201 Wind Tracker Display
200-06206 Marine Wind Tracker Display
 |
 |
| 200-06201 Wind Tracker Display | 200-06206 Marine Wind Tracker Display |
The Model 200-06201 Wind Tracker wind speed and wind direction indicator offers big performance in a compact display. Wind speed is displayed in your choice of units, knots, mph, km/h, m/s. Maximum wind speed is saved on the display until reset by the operator. Wind direction information is clearly displayed on a circular compass pattern of LEDs. Multicolored segments give a quick visual indication of current direction and direction variability. Real-time or averaged data can be displayed. The 200-06206 Marine Wind Tracker indicates wind angle relative to vessel heading. Front panel brightness control allows adjustment for best viewing in any light.
A variety of wind sensors are supported. Standard outputs are 0‑5 Vdc and RS485 for additional displays. Alarms for both wind speed and wind direction are provided. The Wind Tracker is very compact. Face size is 144 mm x 144 mm to fit standard DIN panel configurations. Depth is 36 mm for easy mounting on vertical bulkheads or wall surfaces. 12‑30 Vdc power enables the Wind Tracker to be powered by external batteries or AC wall adapter (included).
Specifications
Wind Speed Range
0-100 mph, 0-50 m/s, 0-200 km/h, 0-100 knots
Wind Direction Range
200-06201: 0-360° (36 points)
200-06206: 0-180° (port and starboard)
Display Resolution
Wind Speed & Maximum: 1 unit (0.1 M/S only)
Wind Direction: 10° (36 points circular), 1° (digital display mode)
Compatible Sensors
Wind Monitor
Wind Monitor-MA
Wind Monitor-AQ
Wind Sentry
200-101908 Current Loop Wind Sensor
200-7000-3 WindSonic Anemometer
200-WS-23 Current Loop Wind Sensor
200-2201 NovaVane (with 4-20mA line driver)
Other sensors can be used with this display if the output can be set up for the correct 4-20 mA signals
Other Inputs/Outputs
RS485 for additional slave displays
NMEA compatibility on 200-06206 only
Voltage Outputs
0-5 Vdc Full Scale for WS & WD
Alarm Relays
Normally Open contacts for WS & WD, with adjustable delays
Contact Rating
5A resistive, 2A inductive @ 24 Vac/30 Vdc
Remote Displays
Up to 16 remote displays can be connected to one sensor
Power Requirement
12-30 Vdc, 4.5 W
Dimensions
144 mm (5.65") x 144 mm (5.65") x 36 mm (1.4")
Panel Cutout: 138 mm (5.43") x 138 mm (5.43")
Weight
Display: 1 lb (0.45 kg)
Shipping: 3 lb (1.4 kg)
Ordering Information
200-06201 Wind Tracker, 110V/60Hz adapter
add suffix "C" Optional 0-540° Wind Direction Range
add suffix "H" Optional 230V/50-60Hz Adapter
200-06206 Marine Wind Tracker, 110V/50Hz adapter
add suffix "H" Optional 230V/50-60Hz Adapter
200-06260 Protective Enclosure
200-06280 Rack Mounting Panel, 19" rack
Go to...
Weather Stations
Wind Speed & Direction Sensors
Main Table of Contents
Top of Page