200-2510-A & 200-2511-A Totalizing Anemometers

200-2510-A Totalizing Anemometer

The 200-2510-A (200-2511-A) Totalizing Anemometer is equipped with a counter to provide a simple, yet precise, method of determining average wind speed and total air passage. It has been redesigned to replace the old mechanical instruments that are no longer being produced. The new unit is self-contained and consists of an anemometer for wind measurement readings and a programmable 8-digit electronic LCD digital display that converts cup rotation to counter increment. Average wind speed can be calculated from the difference between successive counter readings divided by the time interval between readings. The easy-to-read display is housed in a NEMA-4X enclosure and is powered by an internal lithium battery with a 5+ year life. The unit can be calibrated to readout in miles or kilometers.

In an evaporation station, the anemometer is typically mounted on the platform supporting the evaporation pan. The unit is supplied with a pre-drilled mounting flange for this purpose.

Specifications

Sensor: 3-cup assembly, glass reinforced nylon, 1.125" diameter cups
Transducer: Magnet reed switch, permanent magnet
Output: Counter increment
Counter type: 8-digit electronic, LCD in NEMA-4X enclosure
Counter range: 0 to 9,999,999.9 mile or kilometer
Resolution (counter and contact): 0.1 mile or 0.1 km
Sensor range: 0 to 100 mph (0 to 45 m/s)
Threshold: 0.8 mph (0.35 m/s)
Cup constant: 960 revolutions/mile (579 revolutions/km)
Materials: Thermoplastic, anodized aluminum, stainless steel
Mounting: pre-drilled flanged base
Size: Body: 5.5" W x 5" D x 16" H (140 x 127 x 400 mm)
Turning radius: 6"
Weight/shipping: 5 lbs/9 lbs (2.3 kg/4 kg)

Ordering Information

Go to...
Wind Speed & Direction Sensors
Main Table of Contents
Top of Page