WeatherPort Wind Speed and Direction Sensors 
 |
| 200-WS-02 Anemometer & Vane |
This series of WeatherPort Wind Sensors are moderately priced quality transducers designed for general application. A combination of injection molded thermoplastic, anodized aluminum, and stainless steel parts contribute to reliable operation in adverse environments.
These sensors are easy and inexpensive to maintain. The combination three cup anemometer and wind vane units utilize an in-line configuration, eliminating the need for a crossarm.
The anemometers produce a series of output pulses having a frequency directly proportional to wind speed. Wind direction is measured by a balanced vane coupled to a 20k ohm conductive plastic potentiometer. With a constant excitation voltage of less than 15 volts, the output from the wiper arm is proportional to the wind azimuth angle.
 |
| 200-605 High Sensitivity Wind Speed and Wind Direction Sensors on Crossarm |
The WeatherPort High Sensitivity Wind Sensors are similar to those described above, but they are specially configured to meet U.S. Environmental Protection Agency requirements for PSD (Prevention of Significant Deterioration).
Specifications
200-WS-01 Wind Speed Sensor
Turning radius: 4.25"
Speed threshold: 0.8 mph
Transducer type: Magnetic reed switch
Speed constant: 1.25 mph = 1 pps
Measurement range: 0-99 mph
Accuracy: 0.5 mph or ± 3%
Size: 4.5" H x 8.5" W
Mounting: 1" o.d. pipe
Cable: 40', 2 conductor, 24 AWG
Weight/shipping: 1 lb/2 lbs
200-WS-04 Wind Direction Sensor
Azimuth accuracy: ± 3°
Transducer: 20K ohm potentiometer, single wiper
Potentiometer gap: 5°
Distance constant: 1.5'
Damping ratio: 0.4
Vane threshold: 1.2 mph
Measurement range: 0-360° mechanical, 0-355° electrical
Resolution: < 1°
Time constant: 2 sec
Turning radius: 6"
Size: 12-1/2" H x 8" W
Mounting: 1" o.d. pipe
Cable: 40', 3 conductor, 24 AWG
Weight/shipping: 1 lb/2 lbs
200-WS-02 Wind Speed & Direction Sensor
The 200-WS-02 is a combination of the above sensors mounted in an in-line configuration.
Cable: 40', 5 conductor, 24 AWG
Weight/Shipping: 2 lbs/3 lbs
High Sensitivity - Speed
Turning radius: 4.25"
Threshold: 0.8 mph
Transducer type: Magnetic reed switch
Speed Constant: 1.25 mph = 1 pps
Measurement range: Speed 0-99 mph
Accuracy: 0.5 mph or ± 3%
High Sensitivity - Direction
Azimuth accuracy: ± 3°
Transducer: 20K ohm potentiometer, single wiper
Potentiometer gap: 5°
Linearity: 1%
Distance constant: 2.6'
Damping ratio: 0.4
Vane threshold: 0.8 mph
Turning radius: 12.5"
High Sensitivity - Overall
Size:
WS-04H: 12-1/2" H x 16-1/2" L x 1-1/2 W
WS-05: 12-1/2" H x 16-1/2" L x 8" W
Mounting: 1.07" i.d. fits over 1" o.d. (3/4" i.d.) pipe
Cable: 40', 5 conductor, 24 AWG, shielded
Weight/shipping: 2 lbs/4 lbs
Environmental
Operating temperature: -40° to +60°C
Relative humidity: 0-100%
Manuals
200-WS-02E Wind Speed & Direction Sensor
Ordering Information
200-WS-01 Wind Speed Sensor
200-WS-01B for WS-21, WS-22A, WS-23S, 200-455, 40' cable
200-WS-02 Wind Speed and Direction Sensor
200-WS-02B for WS-22, 40' cable
200-WS-02D for WS-14, 40' cable
200-WS-02E for WS-16, WS-18, 40' cable
200-WS-02F for WS-23, other general use, 40' cable
200-WS-03 Wind Speed, Wind Direction, and Temperature Sensor
200-WS-03C for WS-14, 40' cable
200-WS-03D for WS-12, 40' cable
200-WS-04 Wind Direction Sensor, 40' cable
200-WS-04H High Sensitivity Wind Direction Sensor, 40' cable
200-WS-05 High Sensitivity Wind Speed and Direction Sensor
200-WS-05D for WS-14, 40' cable
200-WS-05E for WS-16, 40' cable
200-600 Crossarm, 24" wide, without sensors
200-601 General Purpose Wind Speed and Direction Sensors on Crossarm, 40' cable
200-605 High Sensitivity Wind Speed and Direction Sensors on Crossarm, 40' cable
330-0224 Additional Cable, for WS-01, per foot
330-0324 Additional Cable, for WS-04, per foot
330-0524 Additional Cable, for WS-02 and WS-05, per foot
2502-14 Replacement Anemometer Cup Assembly
2502-14-01B Replacement Anemometer Cup Assembly, for 200-WS-01B only
2502-15 Replacement Vane Assembly, general purpose
2502-16 Replacement Vane Assembly, high sensitivity
Please contact us for information about repairing these sensors.
Go to...
Wind Speed & Direction Sensors
Main Table of Contents
Top of Page