220-HMP155D Relative Humidity Sensor
225-HMP155A Relative Humidity and Temperature Sensor
225-500-B Relative Humidity and Temperature Sensor
225-501-B Relative Humidity and Temperature Sensor
225-HMP60A Relative Humidity and Temperature Sensor
 |
| 225-HMP155 & 225-HMP60 RH/Temp Sensors |
The 225-HMP60A Relative Humidity & Temperature Sensor features the laser trimmed INTERCAP® capacitive for accurate relative humidity measurements. The chip is user replaceable and requires no calibration. A membrane filter protects the sensor from dirt and dust. The 225-HMP60A also measures temperature. The sensor should be mounted in a solar radiation shield when placed outdoors.
The 220-HMP155D Humidity Sensor provides reliable humidity measurement utilizing a new generation HUMICAP 180R sensor that has excellent stability and withstands well in harsh environments. The probe structure is solid and the sensor is protected with a sintered teflon filter. The 220-HMP155D is especially designed for use in meteorological applications and hydrological weather stations. It has a weatherproof IP66 housing and 11 feet of cable with an 8-pin MP12 connector. An electrical circuit in the sensor body converts the capacitance to a voltage output which is linearly proportional to the ambient relative humidity. Calibration adjustment potentiometers are provided.
The 225-500-B Relative Humidity & Temperature Sensor has the addition of an integrated circuit transducer that provides a linear microamp current output proportional to temperature. The 225-501-B utilizes a one-element thermistor and the 225-HMP155A uses an active temperature circuit with a linear 0-1 Vdc output. Contact NovaLynx for other temperature sensor options.
Specifications
225-HMP60A Relative Humidity & Temperature Sensor
Humidity measurement range: 10 to 90% (for which accuracy is specified)
Humidity accuracy: Better than ± 3% @ +68°F (+20°C)
Humidity operating range: 0-100% RH
Stability: ± 2% RH over 2 years
Temperature measurement range: -40° to +140°F (-40° to +60°C)
Temperature accuracy: 1.1°F (± 0.6°) @ +68°F (+20°C)
Input power: 7-28 Vdc
Current consumption: 2 mA typical
Output signal: 0 to 1 Vdc standard; 0 to 5 Vdc available on special order
Housing material: Chrome-coated aluminum (IP 65)
Size: 0.47" Dia (12 mm) x 3" L (80 mm), threaded M12 x 1
Cable length: 12" (313 mm) with molded connector
Cable connector: Screw-on 4-pin M8 molded 1.5" L (37 mm)
220-HMP155D Humidity Sensor
Sensing element: Thin film capacitor, with membrane filter
Measuring range: 0-100% RH
Output: 0-1 Vdc with high and low calibration adjustments
Accuracy: ± 1% (0-90% RH) ± 2% (90-100% RH) at 20
Response time: 20 seconds with filter
Operating temperature: -40° to +140°F (-40° to 60°C)
Excitation voltage: 7-35 Vdc
Power consumption: < 4 mA
Size: 0.75" Dia x 9.45" L
Weight/shipping: 10 oz/1 lb
225-HMP155A Relative Humidity & Temperature Sensor
Humidity: Same as 220-HMP155D
Temperature: Same as 225-HMP60A
225-500-B Relative Humidity & Temperature Sensor
Humidity: Same as 220-HMP155D
Temperature: Same as 210-201
225-501-B Relative Humidity & Temperature Sensor
Humidity: Same as 220-HMP155D
Temperature: Same as 110-WS-16 Temperature
Ordering Information
225-HMP60A Relative Humidity & Temperature Sensor, with 4-pin connector
220-15778 Replacement Humidity Chip, INTERCAP®
220-17039 Replacement Membrane Filter
220-HMP155D Relative Humidity Sensor, 11' cable
225-HMP155A Relative Humidity & Temperature Sensor, 11' cable
225-500-B Relative Humidity & Temperature Sensor, 11' cable
225-501-B Relative Humidity & Temperature Sensor, 11' cable
220-180R Replacement Humidity Sensing Element
220-219452SP Replacement Teflon Filter
330-0524 Sensor Cable, 5 conductor 24AWG shielded
Go to...
Temperature & Humidity Sensors
Main Table of Contents
Top of Page