230-PTB110 Series Analog Barometers

230-PTB110 Analog Barometer

The 230-PTB110 Barometer is designed both for accurate barometric pressure measurements at a room temperature and for general environmental pressure monitoring over a wide temperature range.

The PTB110 barometer uses the Vaisala BAROCAP® Sensor, a silicon capacitive absolute pressure sensor developed for barometric pressure measurement applications. The sensor combines the outstanding elasticity characteristics and mechanical stability of single-crystal silicon with the proven capacitive detection principle.

The excellent long-term stability of the barometer minimizes or even removes the need for field adjustment in many applications.

The PTB110 is suitable for a variety of applications, such as environmental pressure monitoring, data buoys, laser interferometers, and in agriculture and hydrology. The compact PTB110 is especially ideal for data logger applications as it has low power consumption. Also an external on/off control is available. This is practical when the supply of electricity is limited.

Specifications

Operating range:
   230-PTB1104: 600-1060 mb
   230-PTB1105: 800-1060 mb
Temperature range: -40/+140 °F (-40/+60 °C)
Humidity range: Non-condensing
Linearity* ± 0.25 mb
Hysteresis* ± 0.03 mb
Repeatability* ± 0.03 mb
Calibration uncertainty** ± 0.15 mb
Accuracy at +20 °C*** ± 0.3 mb
* Defined as ± 2 standard deviation limits of end-point non-linearity, hysteresis error or repeatability error.
** Defined as ± 2 standard deviation limits of inaccuracy of the working standard including traceability to NIST.
*** Defined as the root sum of the squares (RSS) of end-point non-linearity, hysteresis error, repeatability error and calibration uncertainty at room temperature.
Total accuracy at
   +59/+77 °F (+15/+25 °C): ± 0.3 mb
   +32/+104 °F (0/+40 °C): ± 0.6 mb
   -4/+113 °F (-20/+45 °C): ± 1.0 mb
   -40/+140 °F (-40/+60 °C): ± 1.5 mb
Long-term stability: ± 0.1 mb/year
Supply voltage 10-30 Vdc
Current consumption: less than 4 mA
Output voltage: 0-2.5 Vdc or 0-5 Vdc
Resolution: 0.1 mb
Load resistance: Minimum 10 kohm
Load capacitance: Maximum 47 nF
Settling time: 1 s to reach full accuracy after power-up
Response time: 500 ms to reach full accuracy after a pressure step
Pressure connector: M5 (10-32) internal thread
Pressure fitting: Barbed fitting for 1/8"
Minimum pressure limit: 0 mb abs
Maximum pressure limit: 2000 mb abs
Electrical connector: Removable connector for 5 wires (AWG 28-16)
Terminals
   Pin 1: external triggering
   Pin 2: signal ground
   Pin 3: supply ground
   Pin 4: supply voltage
   Pin 5: signal output
Housing material (plastic cover): ABS/PC blend
Housing classification: IP32
Metal mounting plate: Aluminum
Dimensions: 3.54" x 2.69" x 1.11" (90 mm x 68.4 mm x 28.1 mm)
Weight/Shipping: 3 oz (90 g)/1 lb (.5 kg)
Electromagnetic compatibility: Complies with EMC standard EN 61326-1, Generic Environment

Ordering Information

230-PTB1104A0AB Analog Barometric Pressure Transmitter, 600-1060 mb, 0-5 Vdc output (replaces 230-405)
230-PTB1105A0AB Analog Barometric Pressure Transmitter, 800-1060 mb, 0-5 Vdc output (replaces 230-400)
330-0524 Cable, 5-conductor, 24 AWG, per foot

Go to...
Barometric Pressure Sensors
Main Table of Contents
Top of Page