*** SAMPLE CURRENT OBSERVATION SCREEN V4.09 ~ UDPDATING EVERY 5 SECONDS  ******

Station: WS-16                                              04/12/2007 10:42:30
===============================================================================
         WIND SPEED:  5.0mph, peak windspeed 11.2mph during past 10 min.
          DIRECTION:  NNW, 333deg, varying 24deg during past 10 min.
         WIND CHILL:  +77F

CURRENT TEMPERATURE:  +74.7F, +0.0F change during past hour
   TODAY'S HIGH/LOW:  +75F at 09:39, +64F at 04:27
          DEW POINT:  +3F
 AUX TEMPERATURE A3:  Not Configured
 AUX TEMPERATURE A6:  Not Configured

    SOLAR RADIATION:  Not Configured

          BAROMETER:  28.34inHg, +0.01 inHg change during past 3 hours
   TODAY'S HIGH/LOW:  28.28inHg at 04:29, +28.34inHg at 10:03

  RELATIVE HUMIDITY:  6%, -3% change during past hour

      PRECIPITATION:  Since Log: 0.00in  Today: 0.76in  This Month: 2.14in


(Press M key twice for main menu)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`

Setup Menu

1. Station Name: WS-16
2. Date & Time: 04/12/2007 10:43
3. Averaging Period: 15 minutes
4. Logging Interval: 15 minutes
5. Add or Remove Sensors
6. Enter Alarm Thresholds
7. Hardware/Firmware
8. Return to Main Menu

Enter your selection [1 - 8]:


Sensor Configuration

    Sensor Type       Model             Input  Units   Calibration
------------------------------------------------------------------
 1. Wind Speed        200-WS-01/02       +P1   mph
 2. Precipitation     All models          P3   in       0.0100
 3. Pressure          100-WS-16BP         A2   inHg
 4. Humidity          110-WS-16TH         A4   %
 5. Temperature       110-WS-16T         *A5   F
 6. Wind Direction    200-WS-02/05       -A7   deg



Output Format Menu

1. *Current Observations Display
2.  Row and Column Display
3.  Aloha Output
4.  Continuous Hand Held Display
5.  No Output
6.  Return to Main Menu

* Indicates current format: 5 sec samples

Enter your selection [1 - 6]: 2


************* SAMPLE Row and Column Display Below ~ 5 sec update **********

Please wait up to 10 seconds for next display
04/12/2007, 10:45:55, 5.00, 0.00,  28.34, 7.44, 74.90, 345.59, 77.46,  8.05
04/12/2007, 10:46:00, 5.75, 0.00,  28.33, 5.40, 75.44, 337.06, 77.99,  1.46
04/12/2007, 10:46:05, 4.00, 0.00,  28.33, 5.40, 75.44, 314.91, 78.25,  1.46
04/12/2007, 10:46:10, 9.00, 0.01,  28.33, 5.40, 75.44, 319.22, 77.64,  1.46
04/12/2007, 10:46:15, 7.50, 0.00,  28.34, 7.74, 75.25, 326.34, 77.56,  9.17
04/12/2007, 10:46:20, 6.75, 0.00,  28.34, 7.74, 75.25, 341.46, 77.64,  9.17


************** SAMPLE SHOWING >>> Display Log by Hours ************************

                  P1      PP1       P3       A2       A4       A5       A7
 DATE  TIME       WS      PKW       RF       BP       RH       TP       WD
 M/D   H:M       mph      mph       in     inHg        %        F      deg
===============================================================================
04/12 07:45     5.19    10.69     0.00    28.34     9.44    71.06   320.44
04/12 08:00     5.94     9.44     0.00    28.34     9.62    71.69   324.88
04/12 08:15     5.12     9.44     0.00    28.34     9.06    72.25   328.00
04/12 08:30     6.25    10.94     0.00    28.33     8.44    72.75   324.56
04/12 08:45     5.19     9.94     0.00    28.33    10.62    73.38   325.12
04/12 09:00     5.38    10.69     0.00    28.33    12.38    73.81   337.44
04/12 09:15     5.81    11.19     0.00    28.33     9.81    73.94   328.12
04/12 09:30     6.38    12.44     0.00    28.33    10.06    74.25   333.69
04/12 09:45     7.06    14.19     0.00    28.33     8.69    74.56   329.19
04/12 10:00     6.44    11.94     0.00    28.33    10.38    74.62   325.19
04/12 10:15     6.06    10.94     0.00    28.33    10.12    74.62   334.94


Main Menu                   **** STEPS TO DOWNLOAD DATA  ****

1. Station Setup
2. Output Format
3. Display Log by Hours
4. Display Log by Days
5. Data Off-load
6. Clear Logging Memory

Enter your selection [1 - 6]: 5

Press the Y key when ready for
Xmodem file transfer, or press
any key to return to the main menu. y

In HyperTerminal, select Transfer | Receive File...
Enter destination folder, select Xmodem Protocol, and click Receive.
HyperTerminal will prompt for a file name to receive the data.
Once the file name is entered, click OK and the transfer will begin,


**** TYPICAL SAMPLE DATA SAVED AND VIEWED WITH NOTEPAD ****
 
"WS-16"
"DATE","TIME","WS","PK","RF","BP","RH","TP","WD"
04/05,11:15,2.25,4.19,0.00,28.33,8.81,74.88,323.94
04/05,11:30,2.19,4.44,0.00,28.33,10.06,74.94,318.00
04/05,11:45,2.69,5.19,0.00,28.33,9.31,75.19,321.00
04/05,12:00,3.06,5.69,0.00,28.33,7.81,75.50,326.94

 /////////////////////////////////////////////////

04/12,10:00,6.44,11.94,0.00,28.33,10.38,74.62,325.19
04/12,10:15,6.06,10.94,0.00,28.33,10.12,74.62,334.94
04/12,10:30,5.50,11.94,0.00,28.33,10.06,74.56,333.81